UC知道工业英语翻译帮个忙！！
来源：百度知道 编辑：UC知道 时间：2024/06/05 21:43:49
1) Two channels are voltage-type BTL drivers for
actuators of tracking and focus. Two channels are
voltage-type BTL driver for sled and spindle
motors. It is also built-in one channel bi-direction
DC motor driver for tray.
2) Wide dynamic range [9.0V (typ.) when Vcc1=
Vcc2= 12V, at RL= 20Ω load].
3) Separating power of Vcc1 and Vcc2 is to
improve power efficiency by a low supply
voltage for tracking, focus, and spindle.
4) Level shift circuit built-in.
5) Thermal shut down circuit built-in.
6) Mute mode built-in.
7) Dual actuator drivers:
A general purpose input OP provides differential
input for signal addition. The output structure is
two power OPAMPS in bridge configuration.
8) Sled motor driver:
A general purpose input OP provides differential
input for signal addition. The output structure is
one power OPAMP in bridge configuration.
9) Spindle driver:
Single input linear B
actuators of tracking and focus. Two channels are
voltage-type BTL driver for sled and spindle
motors. It is also built-in one channel bi-direction
DC motor driver for tray.
2) Wide dynamic range [9.0V (typ.) when Vcc1=
Vcc2= 12V, at RL= 20Ω load].
3) Separating power of Vcc1 and Vcc2 is to
improve power efficiency by a low supply
voltage for tracking, focus, and spindle.
4) Level shift circuit built-in.
5) Thermal shut down circuit built-in.
6) Mute mode built-in.
7) Dual actuator drivers:
A general purpose input OP provides differential
input for signal addition. The output structure is
two power OPAMPS in bridge configuration.
8) Sled motor driver:
A general purpose input OP provides differential
input for signal addition. The output structure is
one power OPAMP in bridge configuration.
9) Spindle driver:
Single input linear B
1)两条渠道是为开动的人移动摄影的电压-类型BTL司机和聚焦.两条渠道为雪橇和绕线杆马达是电压-类型BTL司机.它内置一条渠道为盘子也是两性-方向DC马达司机.2)宽阔动态的范围9.0V((typ).当在RL= 20Ω负担 Vcc1= Vcc2=12V的时候.Vcc1和Vcc2的3)分开力量是要按照一低供应电压改进力量效率因为移动摄影聚焦,和长得细长.4)差不多轮班环路固定建筑物的用具.5)上升的热气流关闭环路固定建筑物的用具.6)不发音方式固定建筑物的用具.7)双的开动的人司机:一普遍目的投入OP向信号增加提供有区别投入.输出结构是在桥配置中两力量OPAMPS.8)雪橇马达司机:一普遍目的投入OP向信号增加提供有区别投入.输出结构是在桥配置中一力量OPAMP.9) 绕线杆司机:独身投入线的BTL司机.输出结构是在桥配置中两力量OPAMPS.10盘子进入-从司机里面:DC马达司机支持为盘子马达转寄// 改变控制手段.11个2个内置调节器审计员可调节范围1.5V~4V