UC知道急求，专业翻译。
来源：百度知道 编辑：UC知道 时间：2024/06/16 01:30:10
1.下排pin针折弯角度不良及歪斜导致产品无法插入PCB板
2.产品制程中下排pin针打弯角度不良，有小于90度，导致两排pin间距、有超公差
3.折弯治具槽让位太小，产品放入推动时有干涉导致pin变形
4.此产品折弯端未进行模拟插板检验，目视检验不易检测出导致不良品流出
5.客户端库存500k，请客户协助挑选使用
6.避免人为操作不当导致pin推动受力变形
7.对打弯站工作人员进行现场再指导培训，加强自检能力
2.产品制程中下排pin针打弯角度不良，有小于90度，导致两排pin间距、有超公差
3.折弯治具槽让位太小，产品放入推动时有干涉导致pin变形
4.此产品折弯端未进行模拟插板检验，目视检验不易检测出导致不良品流出
5.客户端库存500k，请客户协助挑选使用
6.避免人为操作不当导致pin推动受力变形
7.对打弯站工作人员进行现场再指导培训，加强自检能力
1 The lower pin-bending angle and skew lead to undesirable products can not be inserted into PCB board
2 Product manufacturing process under the row pin Zhenda bad angle bends, less than 90 degrees, resulting in two rows of pin spacing, a super-Tolerance
3 Bending a rule slot yield is too small to promote products Add to have caused interference pin deformation
4 This product is not bending to simulate-socket board examination, visual inspection difficult to detect lead to the outflow of non-performing
5 Client inventory 500 k, to help customers choose to use
6 To avoid improper operation led to artificially promote the pin deformation
8 Duida bending station staff at the scene to guide training, to strengthen self-inspection capabilities