请高手帮忙翻译一下下面的英文说明书,急用!!!!

来源:百度知道 编辑:UC知道 时间:2024/05/16 04:11:19
A coal-fired thermal power plant.

Coal is conveyed (14) from an external stack and ground to a very fine powder by large metal spheres in the pulverised fuel mill (16). There it is mixed with preheated air (24) driven by the forced draught fan (20). The hot air-fuel mixture is forced at high pressure into the boiler where it rapidly ignites. Water of a high purity flows vertically up the tube-lined walls of the boiler, where it turns into steam, and is passed to the boiler drum, where steam is separated from any remaining water. The steam passes through a manifold in the roof of the drum into the pendant superheater (19) where its temperature and pressure increase rapidly to around 200 bar and 570°C, sufficient to make the tube walls glow a dull red. The steam is piped to the high pressure turbine (11), the first of a three-stage turbine process. A steam governor valve (10) allows for both manual control of the turbine and automatic set-point following. The steam is exhauste

一座煤-烧热的发电厂. 煤存在按照在pulverised燃料工厂(16)中大金属球体从一外部堆和地传送(14)到一非常好粉末.那里它被不得已拉挥棒不中(20)和驱动预热空气(24)混合.胡说八道-燃料混合物存在在高压变为强行打开那里它迅速燃烧的锅炉.一高纯洁的Water沿着锅炉,那里它蒸汽在那里存在和任何停留水分离,变成蒸汽和被把传给锅炉鼓的加管子-衬墙垂直地流.通过一在屋顶中复式接头变为垂饰过热器(19),那里它的温度和压力迅速增加到大约200酒吧和足够制做管子570°C用围墙围住光辉a的鼓的蒸汽通行证使红色迟钝.蒸汽存在向高压涡轮机用管子输送(11),一三-舞台涡轮机过程的第一.一蒸汽州长阀门(10)考虑到手工的和自动对涡轮机的控制和局决胜分-支持者.蒸汽存在从高压涡轮机排出气体和减少在朝派压力和温度,存在把再热器(21)归回锅炉.把蒸汽存在那时再加热把(9)传给中间的压力涡轮机,和从那里向低气压涡轮机装置(6)直接通过.现在在它的沸点的上方有一点被在它在哪里把迅速后面压缩成水的condensor(8)中热的使出去蒸汽接触冷水(进入从冷却塔抽创造接近真空的conditions内部condensor胸部.压缩的水是,被一供水唧筒泵(7)用那时通过一脱气器(12),和预先使第一在朝派一喂发热器(13)暖和给在附近蒸汽,从在economiser(23)中高压装置然后吸引提供动力以前的事物存在被返回的向锅炉鼓.在被在冷却的水文循环循环中condensor(8)回到抽之前,从condensor存在冷却的水在一座冷却塔塔里面喷洒(1)建立一水蒸汽蒸汽的高度可见羽毛. 三涡轮机装置在同样的作为t轴上有时被连接

一个燃煤热电厂

煤炭被在被磨成粉的燃料磨房(16)的大金属球形转达(14)从外堆栈和地面到一粒非常美好的粉末。 那里它与压力通风风扇(24)混合驾驶的被预先加热的空气(20)。 热的航空燃料混合物是牵强的在高压入它迅速地点燃的锅炉。 高纯度的水流动垂直锅炉的管被排行的墙壁,它把变成蒸汽和通过到锅炉鼓,蒸汽从剩余的水被分离。 蒸汽穿过在鼓的屋顶的一根多头管入下垂过热装置(19)它的温度和压力迅速地增加到大约200酒吧和570°C的地方,充足做管墙壁焕发暗红。 蒸汽用管道输送到高压涡轮机(11),第一次一个第三阶段的涡轮过程。 蒸汽州