英语高手请进!!!

来源:百度知道 编辑:UC知道 时间:2024/06/18 05:29:16
21 afther fabrication of steel members is completed in a factory,structural components are transported to the site by railroad flat cars,trucks,or barges
22then they are erected in a predetermined sequence,and the may require storage space
23for multistorey buildings,the components are usually erected in one-storey,two-storey,or even three storey tiers
24for example,the world trade center was constructed of three-storey prefabricated columns and spandrel subassemblies
25thus after the foundations are completed, the columns are raised,set on the base plates,and bolted in place
26during erection,the columns are braced laterally until the structure is completed
27after the columns are set,beams and girders are hoisted in place and temporarily bolted to the columns industrial buildings of one or two storey can be erected by small truck cranes
buildings up to 200ft(61meters)high are usually erected by larger truck cranes
28taller buildings require the

21 铁板在工厂构造好以后,建筑用的零部件就通过铁路,货车,卡车或者平底载货船运送到目的地、
22 接着他们就会被拉着预定的顺序建成,这样它们就需要存储空间
23 在多层建筑中,这些部件在一层,两层或三层中建造
24 比如,世界贸易中心由三层预制圆柱和拱侧配件构成
25 因此,建筑完以后,这些圆柱被提升,放置在基板上,熔接固定
26 建筑过程中,圆柱要横向地不断加固直至构造完成
27 圆柱固定以后,梁和大梁被吊起放在适合的位置,暂时地和圆柱熔接在一起,一层或二层的工业建筑物一般可以通过小卡车起重吊车建造 200英尺(61米)以上的建筑物一般由更大的起重吊车,客车来建造
28 更高的建筑物要求使用特殊的起重机,在建筑物向上建造的过程中,起重机被提到已完成部分的顶部
29 自动提升起动机也被用于多层建筑物
30 这些起重机可以自动从一层跳到另一层
31 这些发展被起动机的杆用来举起桅杆到一个更高的高度
32 指挥中心可以落置在起动机上或者在一个远一点的但是能时时控制这些御载的地方
33 高楼起重机比其他类型更贵,但是却有它自己的优势
34 这些设备也可以用于放置混凝土和其他直接形成地板和屋顶的材料,淘汰斜槽,漏斗和独拴手推车。

阅读:
当今的钢铁说明书中,扣件的四种类型都被同意用于钢铁建筑中的梁和梁之间,梁和栓之间的
连接,他们是铆接,熔接,不完全栓接和强力栓接。这些扣件类型的选择被用于特别的结构包括很多的因素,包括本地建筑代码的要求,相关经济,设计倾向,好焊工和铆工的可利用性,装御情况(静电的或者疲劳装御)

21afther成员完成钢铁制造工厂,以结构部件运到工地的小火车汽车、卡车、驳船 他们预定在22then设置顺序,可能需要存储空间 23for多层建筑物,通常设在一个组件层、二层、三层、甚至三个层次 24for如世界贸易中心兴建的三层栏目和预制塑料组合 25thus基金会完成后,提出栏目,定于基地台,并锁上一楼到位 26during勃起、横向到栏目都为之结构完成 27after栏载,梁根正红旗到位而暂时锁上一楼的一大支柱产业和两