UC知道cisco 2611
来源：百度知道 编辑：UC知道 时间：2024/06/16 21:32:56
本人将2611的IOS刷到c2600-ik8o3s-mz.122-11.T后开机就出现如下提示,请问怎么才能恢复系统?还有就是哪位兄弟有2611支持VTP的IOS发个给我.谢谢!
program load complete, entry point: 0x80008000, size: 0xe688c8
Error : memory requirements exceed available memory
Memory required : 0x025067E4
*** System received a Software forced crash ***
signal= 0x17, code= 0x4, context= 0x0
PC = 0xbaddaddd, Vector = 0xbaddaddd, SP = 0xbaddaddd
*** Machine Check Exception ***
PC = 0xfff15104, Vector = 0x200, SP = 0x81fffe28
System Bootstrap, Version 12.2(6r), RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xe688c8
Error : memory requirements exceed available memory
Memory required : 0x025067E4
program load complete, entry point: 0x80008000, size: 0xe688c8
Error : memory requirements exceed available memory
Memory required : 0x025067E4
*** System received a Software forced crash ***
signal= 0x17, code= 0x4, context= 0x0
PC = 0xbaddaddd, Vector = 0xbaddaddd, SP = 0xbaddaddd
*** Machine Check Exception ***
PC = 0xfff15104, Vector = 0x200, SP = 0x81fffe28
System Bootstrap, Version 12.2(6r), RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xe688c8
Error : memory requirements exceed available memory
Memory required : 0x025067E4
很不幸的告诉你，你的设备是2611，是不带交换功能的，要那种3640，带交换功能的路由器才能做VTP，不要忘记了VTP是vlan trunk protocol，也就是要在交换机上做的哦！路由器要带交换功能才行！
Error : memory requirements exceed available memory
找个才是错误提示
提示你的内存不足，应该是你的IOS大于你的FLASH大小了
解决办法：你可以换一个小的IOS 或者查看你的FLASH里面是不是有没有删除的东西
不过看你都进到ROMMON模式了 估计是没有东西了 你可以查看一下
高于12.2（11）T以上的IOS一般都支持，另外你的26上需要装上esw模块，nm-16esw，nm-36esw……