UC知道专业英语 高手进 2
来源：百度知道 编辑：UC知道 时间：2024/06/21 09:41:12
2.3. Adhesive preparation and testing
The standard techniques for measuring silicone PSA performance are peel adhesion
(ASTM D-1000), probe tack (ASTM D-2979), rolling ball tack, loop tack and
delamination force from a release liner. One technique referenced extensively in the
recent literature uses a Texture Analyzer™ from Texture Technologies (Scarsdale,
NY, USA) to characterize adhesive performance. This device uses a precise
computer control and monitoring to provide several pieces of data related to tack,
adhesion and cohesion in a single measurement cycle [42]. This instrument appears
to be capable of discerning differences in cohesion, adhesion and wetting aspects of
PSAs, even in cases where no difference was found in the traditional peel adhesion
and probe tack tests. The technique and equipment readily lend themselves to use in
a quality assurance environment. Differential scanning calorimetry (DSC) has also
be
The standard techniques for measuring silicone PSA performance are peel adhesion
(ASTM D-1000), probe tack (ASTM D-2979), rolling ball tack, loop tack and
delamination force from a release liner. One technique referenced extensively in the
recent literature uses a Texture Analyzer™ from Texture Technologies (Scarsdale,
NY, USA) to characterize adhesive performance. This device uses a precise
computer control and monitoring to provide several pieces of data related to tack,
adhesion and cohesion in a single measurement cycle [42]. This instrument appears
to be capable of discerning differences in cohesion, adhesion and wetting aspects of
PSAs, even in cases where no difference was found in the traditional peel adhesion
and probe tack tests. The technique and equipment readily lend themselves to use in
a quality assurance environment. Differential scanning calorimetry (DSC) has also
be
2.3 。胶粘剂的制备及测试
标准的技术测量硅变压吸附性能的剥离粘连
（美国ASTM名D - 1000 ） ，探头钉（美国ASTM名D - 2979年） ，滚动球钉，环钉和
脱层部队释放班轮。一个技术的广泛引用
最近的文献采用质构仪™从纹理技术（斯卡斯代尔，
NY ，美国）的特点胶粘剂性能。这个装置使用了精确
计算机控制和监测提供了几项有关的数据的策略，
粘附和凝聚力在一个测量周期[ 42 ] 。这似乎文书
能够辨别不同的凝聚力，粘附和润湿方面
公益广告，即使在无明显差异的情况下被发现在传统的剥离粘连
和探针粘性测试。该技术和设备，随时适合使用
质量保证环境。差示扫描量热法（ DSC ）也
被用来跟踪过氧化交联反应的硅公益广告[ 43 ] 。
目前的重点放在扩大耐高温的有机硅是公益广告
驱动的焊接温度和较高的愿望干净去除掩蔽
应用。典型的单圈剪切测量不再是足够的
指标高温性能。新的应用程序和要求
导致业绩衡量，监测倾向泡沫，
渣油和幽灵模式（一个可见的形象胶带上留下基板
拆除后，磁带）的形成与基体变色温度“
300 ◦角该方法编写的不锈钢（不锈钢）小组进行测试是很重要的，
因为它会影响测试结果。在某些情况下，细砂纸是用来roughen
不锈钢板的顺利使用前;而在另一些情况下，不锈钢板只是solventrinsed
和烘烤前使用。迄今为止，这是没有完全定论产生什么影响
两种方法制备的业绩结果，虽然有数据
支持预粗糙面板产生更大的敏感性和歧视
对检测鬼影（一可见光图像的测试胶粘剂地带不锈钢板
拆除后，磁带）倾向的变压吸附在高温下。