UC知道专业英语求高手帮忙！
来源：百度知道 编辑：UC知道 时间：2024/05/06 18:26:51
These systems were adapted to the tools for
this project to improve the quality of the deep drawn
part. In order to draw a TRB with a thickness transition
slope of 1:100 in very good quality, the best results could
be achieved using a multilayer construction consisting
of a thin, quenched sheet metal, a special polyurethane
plate with the shore-A-hardness of 95 and draw beads。The best results for a TRB with a thickness slope of 1:40 on the other hand could be achieved by using a multilayer construction consisting of a thin, quenched sheet metal, a special polyurethane plate with the shore-A-hardness of 80 and a blankholder adapter plate compensating the thickness difference of the TRB at the beginning of the process。
我会在线等待的
this project to improve the quality of the deep drawn
part. In order to draw a TRB with a thickness transition
slope of 1:100 in very good quality, the best results could
be achieved using a multilayer construction consisting
of a thin, quenched sheet metal, a special polyurethane
plate with the shore-A-hardness of 95 and draw beads。The best results for a TRB with a thickness slope of 1:40 on the other hand could be achieved by using a multilayer construction consisting of a thin, quenched sheet metal, a special polyurethane plate with the shore-A-hardness of 80 and a blankholder adapter plate compensating the thickness difference of the TRB at the beginning of the process。
我会在线等待的
这些系统跟该项目的工具是配套的，以便改善深冲件的质量。为了冲制质量很好的厚度变化坡比为1：100 的TRB件，用多层薄的，淬火的金属板，肖氏A硬度为95的一种特殊聚氨基甲酸乙脂板，组成的结构和冲卷边，可获得最好的结果。另一方面，对于带有厚度坡比为1：40，用薄的，淬火金属板，一种肖氏A硬度为80特殊聚氨基甲酸乙脂板，多层结构的，并且能补偿冲制开始处TRB厚度差异的空孔辅助模具，也能获得最好的结果。