UC知道为什么电脑会常出现蓝屏？
来源：百度知道 编辑：UC知道 时间：2024/06/08 22:40:01
A problem has been detected and windows has been shut down to prevent damage to your computer
PAGE_FAULT_IN_NONPAGED_AREA
If this isthe first time you've seen dthis stop error screen,restart your computer .Iftgus screen appears again,follow these steps:
checkto make sure any new hardware oer software is properly installed.If thisis a new in stallation ,ask your hardware or softwaremanufacturer for any windows updates you might need.
If problems contnue ,disable or remove any mewly installed hardware or slftware.Disable BIOS memory optionb such as caching or shadowing . If you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options,and then setect safe mode.
Technical Information:
***stop:0X00000050(0X80A23EA8 0X00000000,0X80A23EA8,0X00000000)
如果重装系统后可以正常使用，可是把它关掉了过几小时不行了！（连续开机不会，机子有点老！）
PAGE_FAULT_IN_NONPAGED_AREA
If this isthe first time you've seen dthis stop error screen,restart your computer .Iftgus screen appears again,follow these steps:
checkto make sure any new hardware oer software is properly installed.If thisis a new in stallation ,ask your hardware or softwaremanufacturer for any windows updates you might need.
If problems contnue ,disable or remove any mewly installed hardware or slftware.Disable BIOS memory optionb such as caching or shadowing . If you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options,and then setect safe mode.
Technical Information:
***stop:0X00000050(0X80A23EA8 0X00000000,0X80A23EA8,0X00000000)
如果重装系统后可以正常使用，可是把它关掉了过几小时不行了！（连续开机不会，机子有点老！）
0x00000050
AGE_FAULT_IN_NONPAGED+AREA
◆错误分析:有问题的内存(包括屋里内存、二级缓存、显存)、不兼容的软件(主要是远程控制和杀毒软件)、损坏的NTFS卷以及有问题的硬件(比如CI插卡本身已损坏)等都会引发这个错误.
◇解决方案:
1.卸掉所有的新近安装的硬件.
2.运行由计算机制造商提供的所有系统诊断软件.尤其是内存检查.
3.检查是否正确安装了所有新硬件或软件,如果这是一次全新安装,请与硬件或软件制造商联系,获得可能需要的任何Windows更新或驱动程序.
4.禁用或卸载所有的反病毒程序.
5.禁用BIOS内存选项,例如cache或shadow
方案里并非每一条都要做,只是每一条都有可能!蓝屏代码50是我看到现在最麻烦的,可能引起的原因非常多!即使那五条你都做了可能都解决不了,至少我以前解决过一次并不在这几条之中,你就先试试看吧!
我的机器也一样。后来换了电源就好了。估计是电源功率下降了
应该是驱动问题