华为交换机配置端口聚合命令的名称及其方法?
来源:百度知道 编辑:UC知道 时间:2024/06/18 03:28:00
华为交换机配置端口聚合
要求聚合的端口工作在全双工,速度一致,在同一槽口且连续。
参数:ingress:源MAC, both:源和目的MAC
SwitchA如下:
[Quidway]sysname SwitchA
[SwitchA]interface ethernet0/1
[SwitchA-Ethernet0/1]duplex full
[SwitchA-Ethernet0/1]speed 100
[SwitchA-Ethernet0/1]port link-type trunk
[SwitchA-Ethernet0/1]port trunk permit vlan all
[SwitchA-Ethernet0/1]int e0/2
[SwitchA-Ethernet0/2]duplex full
[SwitchA-Ethernet0/2]speed 100
[SwitchA-Ethernet0/2]port link-type trunk
[SwitchA-Ethernet0/2]port trunk permit vlan all
SwitchB如下:
[Quidway]sysname SwitchB
[SwitchB]interface ethernet0/1
[SwitchB-Ethernet0/1]duplex full
[SwitchB-Ethernet0/1]speed 100
[SwitchB-Ethernet0/1]port link-type trunk
[SwitchB-Ethernet0/1]port trunk permit vlan all
[SwitchB-Ethernet0/1]int e0/2
[SwitchB-Ethernet0/2]duplex full
[SwitchB-Ethernet0/2]speed 100
[SwitchB-Ethernet0/2]port link-type trunk
[Swi