UC知道汗 高手快来看看 开机关机总蓝屏 只能非法切断电源 着急啊~~~
来源：百度知道 编辑：UC知道 时间：2024/06/05 19:22:33
汗 高手快来看看 开机关机总蓝屏 只能非法切断电源 才能关机
屏幕显示如下:
A problem has been datected and windows has been shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL(这一行有时有有时没有)
If this is the frist time you've seen this stop.error screen,restart your computer,If this screen appears again,follow these step:
check to be sure you have adequate disk space.If a diver is identified in the stop message,disable the driver or check with the manufactrer for diver updates.Try changing video adapters.
check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadowing.If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safe Mode.
Technical information:
***STOP:0×0000008E(0×c0000005,0×0016235c,0×BA24ECAC,0×00000000)
后者有时最下面是
***STOP:0×0000000A(0×FFFFFF94,0×00000002，0×00000000，0×804E25EF)
这都是什么意思啊 是硬盘的问题，还是系统的问题啊．<
屏幕显示如下:
A problem has been datected and windows has been shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL(这一行有时有有时没有)
If this is the frist time you've seen this stop.error screen,restart your computer,If this screen appears again,follow these step:
check to be sure you have adequate disk space.If a diver is identified in the stop message,disable the driver or check with the manufactrer for diver updates.Try changing video adapters.
check with your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadowing.If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safe Mode.
Technical information:
***STOP:0×0000008E(0×c0000005,0×0016235c,0×BA24ECAC,0×00000000)
后者有时最下面是
***STOP:0×0000000A(0×FFFFFF94,0×00000002，0×00000000，0×804E25EF)
这都是什么意思啊 是硬盘的问题，还是系统的问题啊．<
1。硬件IRQ设置冲突
2。硬件本身就冲突
3。安装了什么不合适的驱动程序
建议重新安装系统，看看是否还有此问题。
这个提示的大概意思是说你的某个硬件坏掉了
一般重新安装系统可以解决，或者某些软件之间有冲突。
应该是硬件的问题引起的。可以用主板检测卡查查是什麼零件引起的。也可以拿主机给销售商检查一下。