思科路由器如何设置宽带拨号

首先在以太网口启用PPPoE
int f0/1
pppoe enable group global
pppoe-client dial-pool-number 1

然后配置拨号虚拟端口
int dialer0
ip add negotiated
encap ppp
dialer pool 1
dialer-group 1
ppp auth chap callin
ppp chap hostname 帐号
ppp chap password 密码

长这么大还没用过思科的设备，汗···

这个怎么样 实打实的PPPOE拨号sh run 分给我把，也算我配出来给你的辛苦钱
vpdn enable
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
interface Ethernet0/0
no ip address
full-duplex
pppoe enable
pppoe-client dial-pool-number 1
!
interface Ethernet0/1
ip address 10.0.0.254 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
full-duplex
no cdp enable
!
interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 2
no cdp enable
ppp authentication pap callin
ppp pap sent-username fmapdof password 0 f535120<