UC知道求人工英语翻译~不要软件的~
来源：百度知道 编辑：UC知道 时间：2024/05/20 06:06:31
6 DETERMINATION OF THE EJECTOR PIN SIZE
In order to perform an effective ejection, ejector pins should act against walls, ribs, bosses or any rigid area of the part. Ejector pins should be as large as possible because smaller ejector pins tend to embed themselves deeper into the plastic and sometimes even pierce the
surface on which they are pressing while ejecting the pert.
Occasionally, ejector pins may buckle when the part exhibits excessive resistance to ejection, the ejector pin six that avoids buckling can be calculated according to Euler's formula for columns. It is assumed that an ejector pin is a column that is fr~ at the loaded end and clamped at the other end, as illustrated in Fig. 15.
In order to perform an effective ejection, ejector pins should act against walls, ribs, bosses or any rigid area of the part. Ejector pins should be as large as possible because smaller ejector pins tend to embed themselves deeper into the plastic and sometimes even pierce the
surface on which they are pressing while ejecting the pert.
Occasionally, ejector pins may buckle when the part exhibits excessive resistance to ejection, the ejector pin six that avoids buckling can be calculated according to Euler's formula for columns. It is assumed that an ejector pin is a column that is fr~ at the loaded end and clamped at the other end, as illustrated in Fig. 15.
6测定的顶针尺寸
为了进行有效的弹射，顶针应采取行动对付墙壁，肋骨，老板或任何部分刚性地区。顶针应尽可能大，因为小顶针往往嵌入到塑料本身更深，有时甚至刺穿
表面上他们是紧迫，喷射的有礼有节。
偶尔，顶针，可能扣部分展品时过多抵抗弹出的顶针6，避免屈曲可以计算根据欧拉公式的列。据推测，一个顶针，是一列是在神父〜装载结束，在另一端夹紧，如图所示。 15。