UC知道这段话什么意思，谁帮我翻译一下
来源：百度知道 编辑：UC知道 时间：2024/05/05 11:10:44
The ring travel area is defined as the area from the crown of the cylinder bore to 5/16” below the bottom of exhaust port towards cylinder mounting flange. The cylinder in the ring travel area must not have a radial rate of change in excess of 0.0001 in 15 degrees nor accumulate to a rate of change in excess of 0.0003 in 90 degrees.
The cylinder bore must not be out-of-round in excess of 0.0005 extending from the crown to the top of the exhaust port. From the bottom of the ring travel area to the cylinder skirt, the bore may tape an additional 0.0005 inches larger only.
The bore shall be straight and perpendicular to the flange as specified on the applicable drawing. Deviation of any element of the cylinder from a straight line shall not be at a rate greater than 0.0004 per inch and shall not accumulate to more than 0.0005”.
The application of the chromium deposition shall be in a continuous operation. Double plating is not allowed. The chromium deposit shall be homog
The cylinder bore must not be out-of-round in excess of 0.0005 extending from the crown to the top of the exhaust port. From the bottom of the ring travel area to the cylinder skirt, the bore may tape an additional 0.0005 inches larger only.
The bore shall be straight and perpendicular to the flange as specified on the applicable drawing. Deviation of any element of the cylinder from a straight line shall not be at a rate greater than 0.0004 per inch and shall not accumulate to more than 0.0005”.
The application of the chromium deposition shall be in a continuous operation. Double plating is not allowed. The chromium deposit shall be homog
戒指旅行区域从圆筒的王冠令人讨厌的人被定义为区域到 5/16"向圆筒架设边缘在排气的底部港口下面. 戒指旅行区域的圆筒不能有变化的光线比率超过 0.0001 在 15 度中也不对变化的比率累积超过 0.0003 在 90 度中.
圆筒令人讨厌的人不能是外面的-- 回合超过 0.0005 从王冠到排气港口的顶端扩充. 从戒指旅行区域的底部到圆筒裙子，令人讨厌的人只可能以带子绑起附加的 0.0005 寸比较大的.
令人讨厌的人将是直的到和与如可适用图画所叙述的边缘成垂直. 来自一条直线的圆筒任何的元素偏离以比率不将是比 0.0004 很棒每一寸而且不将累积到超过 0.0005".
铬沈淀的申请在连续的操作方面将是. 加倍电镀不被允许. 铬存款将是同种的, 在外表中一样和自由的从坑，小节，水泡和缺点当做被这件规格明确地允许除.
圆筒将在所有的机械操作 (例如磨的,爱人,deburring 等) 之后被清理除去来自那些操作的所有残渣,及铬在那些操作期间弄碎或放松. 圆筒从可以引起早产儿跛着脚走路或穿着或活塞或戒指的无关系的材料一定是干净的和自由的否则可能是否则有害的对引擎操作.