谁能帮我把下面一段翻译成中文

来源：百度知道编辑：UC知道时间：2024/05/11 02:53:48

智能交通车模控制系统是监控与诱导车载控制系统的一个子系统，上位机通过无线传输的方式，将控制信号输入到凌阳16位单片机（SPCE061A）内，单片机对该信号进行判断，根据不同结果对定时/计数器8253进行设置，输出所需的PWM信号控制速度电机和方向舵机，实现对车模的前进、后退速度，拐弯以及刹车等动作。同时，通过检测、判断特定I/O口，系统还具备自动避障功能。
本设计关键技术：运用凌阳单片机控制8253输出PWM控制信号。该信号误差小，稳定性好，但分辨率不等幅。采用凌阳单片机的本系统具有实时、准确、稳定等优点，此外，还可根据实际需要对系统进行语音，速度检测等方面扩展。
关键字：凌阳16位单片机（SPCE061A），定时/计数器8253，避障，PWM。

Intelligent truck traffic control system is induced Vehicle Monitoring and Control System of a subsystem, PC through a wireless transmission, would control signal input to the microcontroller Sunplus 16 (SPCE061A). SCM signals on the judgment, according to the results of different timer / counter set for 8253. the output PWM signal to control motor speed and rudders, and achieves the truck forward, backward speed, braking and turning movements. Meanwhile, through testing, to judge specific I / O mouth, the system also has automatic obstacle avoidance function. The design of key technologies : the use Sunplus 8253 MCU control output PWM control signal. The error signal small, good stability, but the rate ranges from resolution. Sunplus MCU used in this system is real-time, accurate, and the advantages of stability, in addition, also based on the actual needs of the system of voice, speed detection area expansion. Keywords : Sunplus 16 microcontroller (SPCE061A), timer / counter 8253,