UC知道哪位大哥，大姐帮忙快点帮我翻译一段文字
来源：百度知道 编辑：UC知道 时间：2024/05/14 08:04:42
制程说明
利用机械钻孔产生层间的连通管道。
工作内容
在压板完成后，其实内层线路的层间并没有连通，无法达成多层电路板连通的目的，因此需要利用机械钻孔的方式将层间打通，目前普遍被使用的钻孔机是数字的多轴钻孔机。这种钻孔机利用数字定位以螺杆式驱动及驱动马达，以驱动台面的运动路径及停止位置，同时利用内藏式的光学尺，以达成精准位置的控制目的。一般的钻孔作业都会是多片钻的方式，因为要运用这样的机械来完成高精准度的机械钻孔，多片迭合时会在以迭的电路板上方覆铝板，以加强散热及保护电路板，底部则加上牺牲背垫板，以保证钻孔穿透性及避免伤害钻孔机台面。
Mechanical drill hole
System regulation explanation
Produces the level using the mechanical drill hole to connectthe pipeline.
Work content
Completes after the clamp, actually the inner layer line levelcertainly has not connected, is unable the goal which achieves themultilayered electric circuit board to connect, therefore needs to usethe mechanical drill hole the way to make a connection the level, atpresent generally the drill press which uses is the digital multiplespindle drill press. This kind of drill press use numeral localizationby the screw rod type actuation and the actuation motor, actuates thefloor the movement way and stops the position, simultaneously uses theInner Tibet -like optics ruler, achieves the fine accurate positionthe control goal. The general drill hole work can be a way which themulti- pieces drills, because must utilize such machinery to completeGao Jingzhun a mechanical drill hole, when multi- pieces superpositioncan in by 迭 the