UC知道电脑光蓝屏是什么原因吖?
来源：百度知道 编辑：UC知道 时间：2024/06/05 21:44:47
蓝屏出现这个
a problem has been detected and windows hasbeen shut down to prevent damage to your computer
PAGE_FAULT_IN_NONPAGEO_AREA.
if this is the first time you have seen this stop screen,restart your computer. if this screen appears again.follow these steps.
check to make sure any new hardware or software is properly installed.if this is new installation,ask your hardware or software manufacturer for any windows updates you might need.
if problems continue,disable or remove any newly installed hardware or software.disable BIOS memory options such as cashing or shadowing
if you need to use Safe Mode to remove or disable comonents,restart your computer ,press F8 to select Advanced statup Options,and then select Safe Mode.
technical information:
***STOP:0*00000050(0*BAD0B154,0*00000000,0*80a8e27,0*00000002)
a problem has been detected and windows hasbeen shut down to prevent damage to your computer
PAGE_FAULT_IN_NONPAGEO_AREA.
if this is the first time you have seen this stop screen,restart your computer. if this screen appears again.follow these steps.
check to make sure any new hardware or software is properly installed.if this is new installation,ask your hardware or software manufacturer for any windows updates you might need.
if problems continue,disable or remove any newly installed hardware or software.disable BIOS memory options such as cashing or shadowing
if you need to use Safe Mode to remove or disable comonents,restart your computer ,press F8 to select Advanced statup Options,and then select Safe Mode.
technical information:
***STOP:0*00000050(0*BAD0B154,0*00000000,0*80a8e27,0*00000002)
内存坏了啊！
问题被查出了并且窗口hasbeen 关闭预防损坏对于您的计算机
PAGE_FAULT_IN_NONPAGEO_AREA 。
如果这第一次是您看见了这个中止屏幕, 重新开始您的计算机。如果这个屏幕看上去again.follow 这些步。
检查确定任一新硬件或软件适当地是installed.if 这是的新设施, 要求您的硬件或软件制造商所有窗口更新您也许需要。
如果问题继续, 使或取消所有最近安装的硬件或software.disable BIOS 记忆选择失去能力譬如兑现或遮蔽
如果您需要使用安全模式取消或使comonents 失去能力, 重新开始您的计算机, 按F8 选择先进的statup 选择, 和然后选择安全模式。
技术信息:
*** STOP:0*00000050(0*BAD0B154,0*00000000,0*80a8e27,0*00000002
重新启动进入安全模式
如果不能进建议重新做系统