UC知道英语高手快来啊...急...
来源：百度知道 编辑：UC知道 时间：2024/05/24 17:56:26
Install the proper socket or attachment to the square drive and apply to nut or bolt and pull handle until you feel and/or hear wrench click. Release pull and wrench automatically resets for next operation.
do not continue to pull after wrench releases. use special care at low torque settings that will pull stops when wrench clicks.
if wrench has not been used or has been in storage for some time, operate it several times at a low torque setting which permits special internal lubricant to re-coat internal working parts.
when wrench is not in use, keep doing adju stment at lowest torque setting.
能不能帮我翻译下啊!!谢谢啊!!!
do not continue to pull after wrench releases. use special care at low torque settings that will pull stops when wrench clicks.
if wrench has not been used or has been in storage for some time, operate it several times at a low torque setting which permits special internal lubricant to re-coat internal working parts.
when wrench is not in use, keep doing adju stment at lowest torque setting.
能不能帮我翻译下啊!!谢谢啊!!!
安装适当的插座或依恋广场驱动和适用于螺帽或螺栓拉处理，直到你觉得和/或听到扳手按一下。释放拉动和扳手自动复位，为下一个行动。
不继续撤出后，扳手新闻稿。使用特殊照顾，在低扭矩的设定，可将撤出站时，扳手点击。
如果扳手未被使用过或已在储存一段时间后，操作数倍于低扭矩设定允许特殊内部润滑剂重新大衣内部工作部件。
扳手时，在不使用，继续做好调节stment在最低转矩设定。
你进google翻译嘛！