UC知道我的电脑自从换了块主板后，老是时不时就蓝屏，出来如下内容。
来源：百度知道 编辑：UC知道 时间：2024/04/28 05:47:01
A problem has been detected and windows has been shut down to prevent damage to your computer.
page_fault_in_nonpaged_area
if this is the first time you've seen this stop error screen.
restart your computer, if this screen appears again,follow there strps:
check to make gure any new hardware or software is properly installed.
if this is a new installation, ask your hardware of software manufalturerfor any windows updates you might need.
if problems continue, disable or remove any newly installed hardware or software.
disable bios memory options such as calhing or shadowing.
if you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safe mode
tech nical ihformation:
*** stop:0x00000050 (0FE72 EAA3,0X00000000,0X804DB486,0X00000000)
beginning dump of physical memory physical memory dump complete.
page_fault_in_nonpaged_area
if this is the first time you've seen this stop error screen.
restart your computer, if this screen appears again,follow there strps:
check to make gure any new hardware or software is properly installed.
if this is a new installation, ask your hardware of software manufalturerfor any windows updates you might need.
if problems continue, disable or remove any newly installed hardware or software.
disable bios memory options such as calhing or shadowing.
if you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safe mode
tech nical ihformation:
*** stop:0x00000050 (0FE72 EAA3,0X00000000,0X804DB486,0X00000000)
beginning dump of physical memory physical memory dump complete.
注意这一句check to make gure any new hardware or software is properly installed.
建议找一个你的主板随机光盘，把你的主板驱动安装一遍。
笨，按ctrl+ait+del
其主要的意思就是：硬件不兼容或者安装的软件和系统不兼容。
要解决的话，你把新主办所支持的功能和旧板比较一下，是否发生硬件冲突——如果是这样的话，那么你的电脑肯定不会正常工作，而且总是出错！
再者，你回忆一下是否新安装了什么软件后，电脑才出现这个毛病呢？如果是的话，到安全模式下把该软件卸载了——安全模式时好多硬件驱动都没有工作，所以不容易出错。就这样，应该能发现问题所在。
硬件不兼容！！
重新安装硬件``和软件。
这个情况我以前也有过，是因为主板支持的内存条频率可能与你现在插上去的内存条频率不相同，也就是说（举个例子）
你原来插在主板上的内存条频率是333MHZ，而且你的主板所支持的内存条频率也是333MHZ，很明显这一定没问。但你现在换了一块主板，并且只能支持266MHZ的。那么你现在还用原来的内存条，结果333》266，会使原内存条频率在工作时出现不稳定（就是内存条频率跳动，太高）使得的主板无法正常工作。
所以此时你就应该再插快266MHZ的内存条，来使的333内存条频率相对降低下来。
以上是假设，你只要换块与主板所支持的内存条频率相同的内存条就可以了。