UC知道说明书翻译,请教!万分感谢
来源：百度知道 编辑：UC知道 时间：2024/06/08 20:10:20
Part Program Load All
Select All will copy (*.*) and register all the program in the selected device
directory to the NC Part Program list.
Touch "HOME" or "EDIT" then "PROGRAMS".
Be sure the programs are on a formatted diskette in the floppy disk
drive.
Touch "TRANSFER PROGRAM" then "TRANSFER PROGRAM IN".
The Transfer To Program Store window appears.
Touch "FLOPPY DRIVE", "SELECT ALL" and "START TRANS-
FER. All programs are copied from the floppy disk to the hard disk
and are added to the _registered programs_ list.
Program Save All
SelectAllwillcopyalltheprogramsintheNCPartProgramlisttoaselected
drive (device) and directory.
Touch "HOME" or "EDIT" then "PROGRAMS".
Be sure a formatted Zip disk is in the Zip disk drive. Touch The
"TRANSFER PROGRAM". Th
Select All will copy (*.*) and register all the program in the selected device
directory to the NC Part Program list.
Touch "HOME" or "EDIT" then "PROGRAMS".
Be sure the programs are on a formatted diskette in the floppy disk
drive.
Touch "TRANSFER PROGRAM" then "TRANSFER PROGRAM IN".
The Transfer To Program Store window appears.
Touch "FLOPPY DRIVE", "SELECT ALL" and "START TRANS-
FER. All programs are copied from the floppy disk to the hard disk
and are added to the _registered programs_ list.
Program Save All
SelectAllwillcopyalltheprogramsintheNCPartProgramlisttoaselected
drive (device) and directory.
Touch "HOME" or "EDIT" then "PROGRAMS".
Be sure a formatted Zip disk is in the Zip disk drive. Touch The
"TRANSFER PROGRAM". Th
分开程序负载所有的
选择所有的遗嘱副本 (*.*) 和调温器在挑选的方法中的所有程序
对收据控制的目录分开程序列表。
然后碰到 " 家 " 或 " 编辑 "" 程序 " 。
确定程序在软式磁盘中的一个被格式化的盘片上
驱动。
然后碰到 " 中转程序 "" 中转程序在 " 。
作预定表仓库窗的中转出庭。
碰到 " 软式磁盘机 " ， " 选择所有的 " 和 "开始反式-
FER。 所有的程序从软式磁盘到硬式磁盘被拷贝
而且被增加到那 _已注册的 programs_ 列表。
全部作预定表节省
SelectAllwillcopyalltheprogramsintheNCPartProgramlisttoaselected
驱动 (方法) 和目录。
然后碰到 " 家 " 或 " 编辑 "" 程序 " 。
确定一个被格式化的 ZIP 磁盘在 ZIP 磁盘驱动器中。 达到那
" 传递程序 " 。 中转取出--升高窗是
显示。。
然后碰到 " 中转程序 "" 中转程序在外 " 。
作预定表仓库窗的中转出庭。
碰到 " 选择所有的 " 而且进入方法名字 (举例来说 ZIP:) 和
目录在那锉: (举例来说作后备) 野外和第 4 踏步的吊箱, 或使用
多程序输出或者 Browse_ 找并且选择驰车道
在 ZIP 磁盘上的和/或目录拷贝收据控制部份程序。
碰触 " 手 " 图像选择驰车道: (举例来说 ZIP), directo-
在 ZIP 磁盘上的 ry(ies) 在目录出庭: (举例来说 \后备) 窗。
选择目录而且按 "