资料翻译?!!!!急!!!!!!

来源:百度知道 编辑:UC知道 时间:2024/05/22 10:42:48
1.20K表示过滤桶经调压,约满桶压力的一半,10K表示经一次调压后为氨气桶压的一半
2.分解炉的报警器是炉内温度超过额定温度时报警的,当报警器蜂鸣时须查明原因。察看温度表是否正常
3.要开连续炉使用时,分解炉应先加温好后再开连续炉加温。
4.如果要停止加工时,始时间的长短,如果两三天时,分解器物无须停止,可停于保温状态。
5.电气自动化控制部分全部采用日本原装富士和德国西门子原件,确保国内电源质量(如电压不稳、频率偏移)问题影响系统工作甚至损坏系统
6.温度到达设定温度后,接完输送带开始使用时冷却水开关必须打开,水温设定50℃---65℃。

1.20K expressed by the surge filter barrel, a barrel-about half the pressure, 10K stated that after a surge of pressure ammonia barrel half two. calciner alarm furnace temperature is more than the rated temperature Alarm, when the faint buzzing alarm to be pinpoint the cause. Thermometer see whether the normal three. Open to the use of continuous furnace, the calciner should come after a good heating furnace for heating. 4. If we are to stop processing, the length of time before, if the February 3 days, the objects do not have to stop decomposition can be stopped on the insulating state. 5. Electric Automation control the use of Japan's all part of the original Fujitsu and Germany's Siemens Original, ensure the quality of domestic power (such as voltage instability, Frequency Offset) affected system even damage the system 6. the temperature reaches the set point temperature, End conveyor belt then started using cooling water when the switch is opened, the water temperature s