UC知道哪位大哥大姐帮小弟翻译一段话啊？
来源：百度知道 编辑：UC知道 时间：2024/05/15 06:21:35
In this study, an adaptive direct slicing method spreading melted polymer or resin on top of hardened
complete with the algorithm for calculating the thickness of layers. Laminated object manufacturing (LOM) uses laser
each layer is proposed.
As an illustration of the method, the beams to produce paper cut-outs of the cross-section of a
algorithm was programmed within the commercial CAD graphic model, which are then glued together to form the
software package, PowerSHAPE.
he method was shown model. The latter two machines are classed as the type
to be fast and accurate in comparison with STL file slicing using solid raw materials. Selective laser sintering (SLS)
and direct slicing, which both used a constant layer uses laser beams to sinter metal, ceramic or polymer
thickness. powder in layers to form a solid mass.
complete with the algorithm for calculating the thickness of layers. Laminated object manufacturing (LOM) uses laser
each layer is proposed.
As an illustration of the method, the beams to produce paper cut-outs of the cross-section of a
algorithm was programmed within the commercial CAD graphic model, which are then glued together to form the
software package, PowerSHAPE.
he method was shown model. The latter two machines are classed as the type
to be fast and accurate in comparison with STL file slicing using solid raw materials. Selective laser sintering (SLS)
and direct slicing, which both used a constant layer uses laser beams to sinter metal, ceramic or polymer
thickness. powder in layers to form a solid mass.
在这项研究, 一个能适应的直接切的方法中传播熔化聚合物或树脂在被硬化的完全顶部以算法为计算层的厚度。被碾压的对象制造业(LOM) 用途laser 各层数提议。作为例证方法的, 射线导致算法的横断面的纸保险开关被编程了在商业CAD 图表模型, 之内一起然后被胶合形成软件包, PowerSHAPE 。他方法被显示了模型。后者二个机器分类作为型是快速和准确的与STL 文件比较切使用坚实原材料。有选择性的laser 焊接(SLS) 并且直接切, 两个使用恒定的层数用途激光束焊接金属, 陶瓷或聚合物厚度粉末在层数形成坚实大量。
在这项研究中，一个自适应直接切片方法散布熔融聚合物或树脂再加上硬化
完成与算法计算厚度层。分层实体制造（ LOM ） ，使用激光
每一层的建议。
为说明该方法，对梁出示文件削减外的横截面一
算法是编程的内部商业CAD图形模型，然后再胶合在一起，形成了
软件包， powershape 。
他的方法是显示模式。后者两台机器被归类为类型
要快速而准确的比较与STL文件切片，采用固体原料。选择性激光烧结（ SLS ）
并直接切片，均用了一个不断层，使用激光束，以烧结金属，陶瓷或聚合物
厚度。在粉层，形成了坚实的群众。