请英语高手帮翻译一下！！给加100

来源：百度知道 编辑：UC知道 时间：2024/06/13 20:18:53
本设计智能传感器调理电路是由八个智能传感器模块组成，每个传感器模块内嵌微处理器单元（MCU），每个传感器在模块不仅完成信号的调理，包括传感器型号的放大、滤波等预处理，而且还可以通过MCU的A/D完成型号的数字转化，同时完成信号的校准和数字信号处理，处理后的数字信号通过通过RS-485通信总线上传至上位机，由上位机进行显示、保存及打印。这样，每个智能传感器模块即可以配置为模拟信号输出，又可以配置为数字信号输出。每个模块也自成系统，即可以独立适用，也可以和后端的虚拟仪器教学实验系统或无线传感器网络系统构成综合系统，实现复杂的信号采集和控制。
请 按专业术语翻译。翻译好 我会再追加分数

The design is smart sensor conditioning for smart sensors by eight modules, each module sensors embedded microprocessor unit (MCU), each sensor in the module not only completed the signal conditioning, including enlarged models of sensors, such as pre-filtering Treatment, but also through the MCU A / D models to complete the digital conversion, signal the completion of the calibration and digital signal processing, digital signal processing after the adoption through the RS-485 communication bus upload the last crew, conducted by the Computer , Save and print. In this way, each of the smart sensor modules that can be configured for analog output, and can be configured for digital signal output. Each module also since a system that can independently apply, and can also back-end of the virtual instrument teaching experimental system or wireless sensor network system constitute a comprehensive system to achieve complex signal acquisition and control.

The design of intelligent sen