请翻译高手帮忙英文翻译下面一段话,拜托了,请不要机译!

来源：百度知道 编辑：UC知道 时间：2024/05/25 02:27:32
选中程序后，系统先对程序进行检查，如有语法错误，则有相应的错误提
示。按[ESC]键中止自动切割方式。需对此程序进行改正后再选。
如果无语法错误，则系统全自动在屏幕上画出此程序的加工轨迹图形。如果
程序含有G41/G42指令，则系统将编程轨迹和加上半径补偿后的轨迹一并显示出
来。

Selected procedures, the first system of inspection procedures, if grammatical mistakes, there were errors in the corresponding
Show. By [ESC] button automatically suspend cutting. Take corrective procedures after this election.
If there is no grammatical mistakes, the system fully automated paint on the screen this trajectory graphics processing procedures. If
G41/G42 procedures contain instructions, the system will be programmed trajectories and the radius of the track compensation displayed together.