UC知道翻译:关于CHAIN技术要求
来源：百度知道 编辑：UC知道 时间：2024/05/14 06:49:19
1. 基本参数
链条节距
相对转角
2. 组装后的链条应保证所有铰接部件转动灵活.
3. 取30节链条在全长支承并施加0.9KN极限载荷状态下测量其长度,长度允差－12.7~19.1mm[ZT].
4. 从每批生产链条中任选3件长度为5节,按ZBJ81.008.1-89进行极限拉伸试验,试验不合格试样加倍进行重复试验,重复试验结果为最终试验结果[ZT].
5. 每段链条应在不少于一个链片制出"X-458"字样.
翻译好,追加30分!!!!
Specification
1. Basic parameter
Chain pitch
Relative corner
2. After the assembly chain link should guarantee that all hinge part rotation is flexible.
3. Takes 30 chain links, in the span supporting and exerts under the 0.9KN ultimate load condition to survey its length, length allowable deviation - 12.7~19.1mm[ZT].
4. From each batch of production chain link the optional 3 lengths are 5, carries on the limit pulling test according to ZBJ81.008.1-89, experiments the unqualified test specimen double to carry on the revision test, revision test result for finally test result [ZT].
5. Each section of chain links should in many generate " X-458 in a track shoe " the inscription.
1. Basic parameters
Chain pitch
Relative corner
2. Assembled after the chain should ensure that all parts hinged rotation flexibility.
3. From 30 in the chain of support and imposed a total length of 0.9 KN limit load measurement