麻烦大家帮忙！翻译！下午要交的作业，谢谢了！

来源：百度知道 编辑：UC知道 时间：2024/05/29 03:39:39
In order to use the power developed by the moving piston,the connecting rod is connected to the bottom of the pistin moves downward,The downward movement of the piston and connecting rod is changed to circular or rotary movement by apart called the crankshaft is a shaft with is ends mounted in such a way that it can rotate.The middle of the crankshaft is offset,and the lower and of the connecting rod is connected to middle of the offset part.The upper end of the connecting rod is joined to the oiston by a pin called the wrist or pistion pin.This pin allows the connecting rod to follow the motion of the crankshaft.

为了使用力量由移动的活塞开发了，连接杆向下被连接到pistin移动的底部，活塞和连接杆的跌势被改变到圆或由分开叫的转台式运动曲轴是一个轴与是登上的末端，在这种情况下它可能转动。曲轴的中部被抵销，并且低和连接杆被连接到垂距零件的中部。连接杆的上端被加入对oiston由称腕子的别针或pistion别针。这个别针允许连接杆跟随曲轴的行动。

为了使用电力开发的移动活塞，连杆连接至底部的pistin向下移动，向下运动的活塞和连杆改为圆形或旋转运动，除了所谓的曲轴是一个轴同是两端安装在这样一种方式，它可以rotate.中等曲轴抵消，并降低和连杆连接到中间偏移part.高端连杆加入到oiston一针所谓的手腕或脚pistion pin.这使连杆按照议案曲轴。