电焊机说明书汉译英12请人工翻译为主

来源：百度知道 编辑：UC知道 时间：2024/05/10 20:58:56
焊丝的安装
cc安装配件 送丝轮
⑨拉出焊丝，通过矫正轮(200、
350KR 焊丝导向槽)插入cc接头中。
⑤松动调节螺钉，使之脱离线轴固定架
⑥将焊丝装入送丝盘上(线轴朝顺时针
方向转动)
⑦把紧固螺钉拧好
⑧从线轴边缘拆掉焊丝松脱的固定装置
(注意焊丝弹起松脱)
⑩调整加压螺母，袖丝径大小加压

Installation Wire
Cc installation accessories round wire feeder
⑨ pull wire through corrective round (200,
350KR wire guide groove) cc inserted in the joints.
⑤ screw loosening regulation, from the tops of the external fixator
⑥ to wire into the wire feeding disk (spindle clockwise North Korea
The direction of rotation)
⑦ to wring good fastening screws
⑧ removed from the wound edge of the loose wire fixtures
(Note that flew loose wire)
⑩ adjust compression nut, silk sleeve diameter pressurized