求人帮忙翻译几段英文!

来源:百度知道 编辑:UC知道 时间:2024/05/01 02:39:31
A complex basis for the strength and stability of the lightweight shape of the gravity dam was developed for the design under consideration. The stress-strain state for a basic and a special loading combination were computed independently by the All-Union Lenin Order S. Ya. Zhuk Scientific-Research Institute for Design and Exploration, the B. E. Vedeneev All-Union Scientific-Research Institute of Hydraulic Engineering, and the Hydromechanics Institute of the Academy of Sciences of the Ukrainian SStL while shear-resistance and overturning computations
were performed by the All-Union Lenin Order S. Ya. Zhuk Scientific-Research Institute for Design and Exploration. We tested 71 dam models, including three models built to a 1 : 125 scale at the Scientific-Research Department of the All-Union Lenin Order S. Ya. Zhuk Scientific-Research Institute for D esign and Exploration and 43 models built to a 1 : 200 scale at the V. V. Kuybyshev Moscow, Order of Red Labor Banner Civil Engineering

一种复杂的基于实力和稳定的轻量级形状重力坝开发设计正在审议之中。这种应变状态的一个基本的和特殊的装载组合计算独立的全联盟列宁勋章南衙。是由甲虫科学研究所设计和探索,待Vedeneev全联盟科学研究所水利工程,以及流体力学研究所科学院乌克兰SSTL公司同时剪切性和倾覆计算载组合计算独立的全联盟列宁勋章南衙的审核。我们测试了71大坝模型,包括三种机型内置了1 : 125个规模在科研部全联盟列宁勋章南衙。甲虫科学研究所的D设计和模式的探索与建立43到1 : 200规模的比例模型进行了测试〜他科研部全联盟列宁勋章南衙。甲虫科学研究所设计与探索调查抗震大坝。
基本结果的应力状态计算大坝基本负荷组合列于表3 。
正常的压应力不超过40公斤/厘米2和主压应力60公斤/厘米ž在下游的脸。在没有裂缝在上游面,普通拉应力不超过5-7 kg/cm2 ;这是可比的计算抗拉强度施工缝是实现施工过程中的托克托古尔水力发电厂[ 8 ] 。龟裂的情况下,开发沿线几个施工缝,上游面对几乎是解除拉伸应力和10-15 %的增长压应力发生在下游face.Similar结果还获得了在该模型的研究.
模型的计算和研究表明,开放的裂缝的深度,在大多数, 1 / 4的高度截面大坝在可预期的服务期。宽度的开放可能会有所不同从0.1毫米间距的情况下打击的命令, 5米至0.3毫米,他们的间距20米远。

有些地方还是不妥